elevator infrared sensor SN-GM1-Z35192H-e elevator light curtain lift parts elevator photocell elevator sensor

Specifications Channel function!

National patent product!

Real 64 diodes,192 beams!

More than "can use" quality!

Much safer, much reliable

SUNNY infrared elevator door protection system (light curtain) can identify, indicate and control each single light beam of the curtain under high speed scanning. When any beam fails to work properly, operator can identify the problem through a flashing lamp warning in the corresponding channel switch. By turning off the switch, the diodes in question will stop working, while the others diodes will continue to function normally. The elevator will be in normal operation condition without the need of urgent repair. The problem can be fixed during routine maintenance to minimize impact to the elevator users. SUNNY light curtains avoid the problem of traditional design, when any one of the beams is out of work the elevator will stop working. Some of the light curtains use timeout function to allow problem diodes to be ignored. This can extend the working life of the light curtain. However, with existing problem in system, the elevator is running in potential risk. SUNNY light curtain, with 64 pairs of diode inside, 192 beams and 10 ms quick response time, is much safer and much more reliable than the product in the market, which ensure the safest protection area even the door is nearly closed ( door width is under 300mm). SUNNY light curtain has advantages in specification as the table listed below, specially great in anti-interference like magnetism, sunlight and the extreme long detector distance, which always technically lead the Chinese market. SUNNY light curtain system obtained the National Invention Award of the People's Republic of China and has the national patent, No. 01105213.9. SUNNY is sole manufacture and supplier in China.  

TECHNICAL SPECIFICATIONS
Model	SN-GM1-Z/O9192H
Number of Diode	64
Distance Between Diodes	42mm middle/ 55mm side
Maximum Beams	192
Minimum Beams	192
Highest Beam	1800±50mm
Lowest Beam	17±5mm
Size	30(width) * 09 (thickness) * 1980mm (height)
Detecting Distance	0~~~~4,000mm + 500mm (standard), 20,000mm for custmization
Vertical displacement at 0 mm	≤ ±20mm
Horizontal displacement at 0 mm	≤ ±10mm
Angular displacement at 0 mm	≤ ± 8°
Cable reliablity	3C passed three-core flexibility wire, tensile resistance < 15N, endure 1,000,000 time twist, length 4.5M ±10%
Light immunity	≥ 100,000 lux
Immune to Sun Light and Refelection	Yes
EMC Compliance	Emission to EN 12015 and Immunity to EN 12016
CE Compliances	YES
UL Compliances	Yes! UL 508,17th Edition, Jan,1999. File NO. E230770
Operating temperature range	-25----+65
IP Rating	IP63detector IP65 controllerbox
Vibration Test	5-55HZ, amplitutde 0.19mm, 20min
Response Time (NPN or PNP)	NO
Response Time ( Relay )	≤ 80 ms
Timeout function	30 ± 5 s
Power Consumption	≤ 7.5 VA
Signal Output	Relay Output
Power Indicator	YES, LED Light
Status Indicator	YES, LED Light
Buzzer in Receiver	active if anything block the light beam for continuous 25 second
Voltage Tolerance	80~240V 60/50HZ

Contact us if you need more details on Elevator Door Sensor. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Sensors for Elevators、Lift Door Sensor. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Elevator Electrical Component > Elevator Photocell & Light Curtain & Curtain Light